DESCRIPTION
Power Amplifier – 5C-CA-P7000
Features:
- · Power ON/OFF switch with an Active indication LED Light
- · TEMP indicator to indicate the rise in heat sink temperature
- · Two types of input jacks(balanced XLR and balanced phone)
- · Three types output jacks (Speak on, 5-way binding post, and phone)
- · Each channel has an independent OFF/LOW CUT/SUBWOOFER Switch where low cut engages a high-pass filter, and subwoofer engages a low-pass filter. Adjusts the cutoff frequency from 25Hz to 150Hz.
- · LED Clip, Signal and Protect indicators to indicate the distortion as well as auto-protecting and auto-balancing the sound inputs in speakers
- · Volume control knobs for easily adjusting volume on each channel
- · Forced air cooling for rapid, heat dissipation
- · Low noise variable speed fans for proper cooling & performance maintenance
- · FREQUENCY adjustment knob to adjust the cutoff frequency.
- · ON/OFF switch to enhance speaker output and provide improved frequency response on speakers.
- · INPUT jacks (Channels A, B) are provided for each channel.
· Modes of Operations
Ø STEREO mode:
Channels A and B operate independently (as with a conventional stereo amplifier). The Channel A input goes to the Channel A output jacks, and the Channel B input goes to the Channel B output jacks.
Ø PARALLEL mode
The Channel A input signal is output through both the Channel A and Channel B output jacks. The Channel B input jacks do not function. Channel A and B volumes can be independently adjusted.
Ø BRIDGE mode
The Channel A input signal is output from the BRIDGE output jacks. To adjust the volume, you must use the Channel A volume control knob.
· SPEAKER Jacks output connectors, 5-way binding post output jacks, Phone output jacks
· GND terminal mutes any distortion coming from the speaker, i.e., hum or noise
Technical Specifications:
Power Output Level (Rated Power)
1 kHz
|
5C-CA-P7000
|
8Ω/Stereo Power/8Ω/Bridge
|
600Wx2/1500Wx2
|
4Ω/Stereo Power
|
900Wx2
|
2Ω/Stereo Power
|
1200Wx2
|
Freq. Response
|
0dB,+0.5dB, -1dB F=20Hz-50kHz
|
Damping Factor
|
≥350
|
S/N Ratio
|
104Db
|
Indictors
|
Power= x1(green)
Protection= x1(Red)
Temp= x1(Red) (heatsinktemp≥85°C
Clip = x2(Red)
Signal= x2(Green)
|
Dimensions(WxHxD)
|
(578x563x215)mm
|
Weight
|
23kg
|
Sensitivity(Vol.max) Rated Power 8Ω
|
+8 dBu
|
USP:
· High performance
· Three modes of connection for ease of installation according to the need of event.
· Best suitable for live stage/DJ/studio/auditorium/worship.
· Clip, protect and signal indication on rear panel for proper protection of your system and easy installation.
· Grounding Terminal mutes any distortion coming from the speaker, i.e., hum or noise.
|